Need help?Do you have a question about the Makita DHS680 and is the answer not in the manual?
General| Blade Diameter | 165 mm |
|---|---|
| Max Cutting Capacity at 90° | 57 mm |
| Max Cutting Capacity at 45° | 41 mm |
| Max Cutting Capacity at 50° | 37 mm |
| No Load Speed | 5, 000 RPM |
| Voltage | 18 V |
| Weight | 3.3 kg |
| Arbor | 20 mm |
| Bevel Capacity | 0° - 50° |
Safety precautions for keeping the work area clean, well-lit, and free from hazards.
Measures to prevent electric shock, including proper plug use and avoiding wet conditions.
Precautions for operator safety, including alertness, PPE, and preventing unintentional starting.
Safety instructions for performing cuts, including hand placement and blade depth.
Maintain a firm grip with both hands and position body to resist kickback forces.
Handle blade binding by releasing trigger and restart cautiously.
Use sharp blades and support panels to prevent binding and kickback.
Ensure the lower guard operates freely and closes instantly after use.
Support workpiece sections and clamp small pieces; do not hold short pieces by hand.
Read instructions, do not disassemble, avoid shorting or exposing to heat/water.
Procedure for removing and installing the saw blade using the Makita wrench.
To Next Page
