Makita DLM382 User Manual

13 ENGLISH
Removing or installing the mower
blade
WARNING: Always remove the lock key and
battery cartridge when removing or installing the
blade. Failure to remove the lock key and battery
cartridge may cause a serious injury.
WARNING: The blade coasts for a few sec-
onds after releasing the switch. Do not start any
operation until the blade comes to a complete
stop.
WARNING: Always wear gloves when han-
dling the blade.
Removing the mower blade
For DLM382
1. Put the mower on its side so that the mowing
heightadjustinglevercomestotheupperside.
2. To lock the blade rotation, insert a screwdriver or a
similartoolintoaholeonthemowerbody.
3. Turn the bolt counterclockwise with the wrench.
1
2
3
►1. Mower blade 2. Screwdriver 3. Wrench
4. Remove the bolt and blade in order.
3
1
2
►1. Blade support 2. Mower blade 3. Bolt
For DLM432
1. Put the mower on its side so that the mowing
heightadjustinglevercomestotheupperside.
2. To lock the blade rotation, insert a screwdriver or a
similartoolintoaholeonthemowerbody.
3. Turn the bolt counterclockwise with the wrench.
1
2
3
►1. Mower blade 2. Screwdriver 3. Wrench
4. Removethebolt,outerange,mowerblade,and
innerangeinorder.
1
2
3
4
►1.Innerange2. Mower blade 3.Outerange
4. Bolt
Installing the mower blade
To install the mower blade, take the removal procedure
in reverse.
WARNING: Install the mower blade carefully.
It has a top/bottom facing. Place the blade so that
the rotational direction arrow faces outward.
WARNING: Tighten the bolt clockwise rmly
to secure the blade.
WARNING: Make sure that the mower blade
and all the xing parts are installed correctly and
tightened securely.
WARNING: When you replace the blades,
always follow the instructions provided in this
manual.

Makita DLM382 Specifications

General

Power Source	Battery
Voltage	18 V
Cutting Width	38 cm
Cutting Height	20-75 mm
Grass Box Capacity	40 L
Battery Type	Lithium-ion
Cutting Height Adjustment	Central