Why won't my Makita DLM380 start?
Your Makita Lawn Mower might not start due to several reasons: * The lock key may not be inserted; make sure to insert it. * Two battery cartridges may not be installed; install the charged battery cartridges. * There might be a battery problem (under voltage); try to recharge the battery cartridge, and if that doesn't work, replace the battery cartridge.
How to troubleshoot a Makita DLM380 that does not start?
If your Makita Lawn Mower doesn't start, there could be several reasons. First, make sure that two charged battery cartridges are correctly installed. Second, check the battery voltage. If the battery is under voltage, recharge it, and if recharging doesn't help, replace the battery cartridge. Finally, ensure that the lock key is properly inserted.
Why is the cutting tool not rotating on my Makita DLM380 Lawn Mower?
If the cutting tool of your Makita Lawn Mower doesn't rotate, stop the machine immediately. This could be because a foreign object, like a branch, is jammed near the blade. Remove any foreign objects that may be obstructing the blade. If the issue persists, it may be due to a problem with the drive system.
What to do if my Makita Lawn Mower motor stops running quickly?
If your Makita Lawn Mower motor stops running after a short time, it could be due to a low battery charge level. Recharge the battery cartridge, and if that's not effective, replace it. Also, check if the cutting height is set too low and raise the height if needed.
Why my Makita DLM380 doesn't reach maximum RPM?
If your Makita Lawn Mower isn't reaching maximum RPM, it could be because the battery cartridge is installed improperly. Ensure it's installed as described in the manual. Another reason could be that the battery power is dropping, so try recharging the battery cartridge. If recharging isn't effective, replace the battery cartridge.
What to do if cutting tool does not rotate on Makita Lawn Mower?
If the cutting tool on your Makita Lawn Mower doesn't rotate, stop the machine immediately! This could be because a foreign object, like a branch, is jammed near the blade. Remove the foreign object to resolve the issue.
Why does my Makita DLM380 Lawn Mower motor stop after a little use?
If the motor of your Makita Lawn Mower stops running after a short period, it could be due to a low battery charge. Recharge the battery cartridge, and if that doesn't solve the problem, consider replacing it. Another possible cause is that the cutting height is set too low. Try raising the cutting height.
What to do if Makita DLM380 does not reach maximum RPM?
If your Makita Lawn Mower is not reaching its maximum RPM, there are a few things you can check. First, ensure that the battery cartridge is installed correctly as described in the manual. Second, the battery power might be dropping, so try recharging the battery cartridge; if it's still not working, replace the battery. If these steps don't resolve the issue, it's possible that the drive system isn't working correctly.
What causes abnormal vibration in a Makita DLM380?
If you notice abnormal vibration in your Makita Lawn Mower, stop the machine immediately. This could be due to an imbalanced, excessively worn, or unevenly worn blade. Replace the blade to resolve this issue.
How to fix abnormal vibration in Makita DLM380?
If you notice abnormal vibration in your Makita Lawn Mower, stop the machine immediately! This could be due to a blade that is imbalanced, excessively, or unevenly worn. Replace the blade to fix this issue.
General| Brand | Makita |
|---|---|
| Model | DLM380 |
| Category | Lawn Mower |
| Language | English |
Explanation of symbols used on the equipment and in the manual for safe operation.
Critical safety guidelines for handling, charging, and storing battery cartridges.
Recommendations to maximize the lifespan and performance of the battery cartridge.
Step-by-step guide on how to install and remove the battery cartridge.
Details on the tool's automatic protection system for tool and battery life.
How to check the battery level using the indicator lamps on the cartridge.
Instructions on operating the power switch to start and stop the mower.
Explanation of how the grass level indicator shows the volume of caught grass.
Procedure for correctly installing the battery cover to protect the tool.
Steps to securely attach and position the upper and lower handles.
Basic instructions and safety precautions for mowing the lawn.
Guidance on cutting long grass in stages to avoid overloading the mower.
Procedure for safely removing and emptying the grass collection basket.
Instructions for safely removing and installing the mower blade.
Steps to correctly attach the grass basket to the mower unit.
Guidelines for proper storage of the mower to ensure safety and longevity.
List of recommended accessories for use with the Makita tool.
To Next Page
