Why won't my Makita DLM432PT2 start?
Your Makita Lawn Mower might not start because two battery cartridges are not installed—install the charged battery cartridges. Alternatively, the battery might be under voltage, in which case you should recharge it or replace it if recharging doesn't work. Also, ensure the lock key is inserted.
What to do if my Makita DLM432PT2 motor stops running quickly?
If the motor of your Makita Lawn Mower stops running after a short time, the battery's charge level might be low, so recharge or replace the battery. Another possible cause is that the cutting height is too low, so try increasing it.
Why does my Makita DLM432PT2 Lawn Mower blade not rotate?
If your Makita Lawn Mower blade isn't rotating, stop the mower immediately. A foreign object, like a branch, might be jammed near the blade. Remove any obstructions.
Why doesn't my Makita Lawn Mower motor reach maximum RPM?
If your Makita Lawn Mower motor isn't reaching maximum RPM, it could be due to a few reasons. First, check if the battery cartridge is installed properly as described in this manual. Second, the battery power may be dropping, so recharge or replace the battery cartridge.
How to fix abnormal vibration in my Makita DLM432PT2 Lawn Mower?
If your Makita Lawn Mower is vibrating abnormally, stop it immediately. This could be due to the blade being imbalanced or excessively worn. Replace the blade.
General safety warnings and important instructions for future reference and safe operation.
Critical safety advice before using battery cartridges to prevent hazards.
Procedure for installing and removing the battery cartridge from the mower.
System that automatically cuts off power to extend tool and battery life.
General| Type | Push lawn mower |
|---|---|
| Motor type | Brushless |
| Cutting width | 430 mm |
| Product color | Green |
| Cutting system | Rotary blades |
| Housing material | Acrylonitrile Butadiene Styrene (ABS), Polypropylene (PP) |
| Number of blades | 2 |
| Number of wheels | 4 wheel(s) |
| Rotational speed | 3600 RPM |
| Maximum lawn area | 575 m² |
| Mulching function | - |
| Maximum cutting height | 75 mm |
| Minimum cutting height | 20 mm |
| Grass collecting volume | 50 L |
| Number of height positions | 13 |
| Cutting clearance adjustment | Yes |
| Cutting clearance adjustment type | Stepped |
| Power source | Battery |
| Battery voltage | 18 V |
Weight and Dimensions| Depth | 1490 mm |
|---|---|
| Width | 460 mm |
| Height | 1045 mm |
| Weight | 16800 g |
To Next Page
