To Next PageTo Next PageWhy does my Makita DLM431Z Lawn Mower motor stop after a short time?
If the motor of your Makita Lawn Mower stops running after a short period, it could be due to a low battery charge. Try recharging the battery cartridge, and if that doesn't work, consider replacing it. Another possible cause is that the cutting height is set too low. In this case, raise the cutting height.
Why isn't my Makita DLM431Z motor reaching maximum RPM?
If the motor on your Makita Lawn Mower isn't reaching its maximum RPM, make sure the battery cartridge is installed correctly as described in the manual. If the battery power is dropping, try recharging the battery cartridge. If recharging isn't effective, replace the battery cartridge.
What to do if the cutting tool on my Makita Lawn Mower doesn't rotate?
If the cutting tool of your Makita Lawn Mower does not rotate, stop the mower immediately! A possible cause is a foreign object, like a branch, jammed near the blade. Remove the foreign object to resolve this issue.
What to do if my Makita DLM431Z is vibrating abnormally?
If you notice abnormal vibration in your Makita Lawn Mower, stop the mower immediately! This could be because the blade is imbalanced, excessively worn, or unevenly worn. Replace the blade to resolve this issue.
General| Brand | Makita |
|---|---|
| Model | DLM431Z |
| Category | Lawn Mower |
| Language | English |
