Makita DP4003 Manual

SPECIFICATIONS
Model DP4003
Capacities
Steel .................................................................................................................................................... 13 mm
Wood ................................................................................................................................................... 38 mm
No load speed (min
–1
) .......................................................................................................................... 0 – 600
Overall length ....................................................................................................................................... 308 mm
Net weight ................................................................................................................................................ 2.0 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Note: Specifications may differ from country to country.
Power supply
The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets without earth wire.
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is
80 dB (A).
The noise level under working may exceed 85 dB (A).
– Wear ear protection. –
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
2
.
EC-DECLARATION OF CONFORMITY
The undersigned, Yasuhiko Kanzaki, authorized by
Makita Corporation, 3-11-8 Sumiyoshi-Cho, Anjo,
Aichi, 446 Japan declares that this product
(Serial No. : series production)
manufactured by Makita Corporation in Japan is in
compliance with the following standards or standard-
ized documents,
HD400, EN50144, EN55014, EN61000
in accordance with Council Directives, 73/23/EEC,
89/336/EEC and 98/37/EC.
Yasuhiko Kanzaki CE 2000
Director
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND
DP4003 (cover) (’100. 10. 24)
2

Makita DP4003 Specifications

General

Brand	Makita
Model	DP4003
Category	Drill
Language	English