UK only
DOUBLE INSULATION
THE ADDITIONALCOMMENT OF ELECTRICALCONNECTION
The tool is double insulated for safety, no earth connection is required.
CAUTION: The tool must be connected to a plug having a rated current greater than that of tool.
The rated voltage and current appear on the name plate.
IMPORTANT: The wires in the mains lead are coloured in accordance with the following code.
NOTE: As the colours of the mains lead of the tool may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
THE WIRE WHICH IS COLOURED BLUE MUST BE CONNECTED TO THE TERMINAL
WHICH IS MARKED WITH THE LETTER ``N'' OR COLOURED BLACK. THE WIRE WHICH IS
COLOURED BROWN MUST BE CONNECTED TO THE TERMINAL WHICH IS MARKED WITH
THE LETTER ``L'' OR COLOURED RED.
CAUTION: Neither wire is to be connected to earth terminal which is marked with the letter ``E'' or symbol
``
''.
FOR 110 VOLT TOOL, USE PLUGS TO BS4343.
Made in Japan
DP4003 (cover) ('100. 10. 24)
884328-228
To Previous Page
Loading...
Need help?
General
