4 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: DP4010 / DP4011
Speed High Low
Drilling capacities Steel 8 mm 13 mm
Wood 25 mm 40 mm
No load speed 0 - 2,900 min
-1
0 - 1,200 min
-1
Overall length 347 mm
Net weight 2.3 kg
Safety class
/II
without notice.
• Weight according to EPTA-Procedure 01/2014
Intended use
The tool is intended for drilling in wood, metal and
plastic.
Power supply
the same voltage as indicated on the nameplate, and
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-1:
Sound pressure level (L
pA
) : 80 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
NOTE: The declared noise emission value(s) has
another.
NOTE: The declared noise emission value(s)
exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
trigger time).
Vibration
-
mined according to EN62841-2-1:
Work mode: drilling into metal
h,D
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
NOTE:
measured in accordance with a standard test method
NOTE:
WARNING:
The vibration emission during actual
-
ue(s) depending on the ways in which the tool is used
especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
power tool.
To Next Page
Loading...
Need help?
General
