To Next PageTo Next Page
Need help?Do you have a question about the Makita DPC 9500 and is the answer not in the manual?
Operator responsibilities, age limits, health, and environmental considerations for safe operation.
Mandatory personal protective gear for head, eyes, ears, hands, respiratory system, and body.
Guidelines for safe refuelling, fuel handling, storage, and the correct gasoline/oil mixture.
Pre-operation checks, safety zones, and ensuring the unit is fully assembled before starting.
Step-by-step guide for attaching the drive arm and mounting the cutting disc securely.
Procedure for adjusting V-belt tension for optimal performance and preventing wear.
Instructions for inspecting, fitting, and securing the cutting disc onto the shaft.
Safety precautions and steps for refuelling the Power Cut with the correct fuel mixture.
Detailed steps for cold and warm starting, including choke and throttle operation.
Procedure for safely shutting down the Power Cut engine using the ignition switch.
Procedure for setting the idling speed jet screw and throttle valve adjusting screw.
Instructions for removing and installing a new V-belt, including tensioning.
Steps to clean the inside of the protective hood to ensure free rotation of the cutting disc.
Guidance on cleaning and maintaining the foam and inner air filter elements.
Information on the paper cartridge air filter, its replacement, and cleaning precautions.
Instructions for moving the cutting attachment between central and side positions.
Description of diamond cutting discs for specific materials and their benefits.
Information on the guide trolley for easier straight cutting and operator comfort.
Details on the water tank accessory for dust suppression and disc cooling.
Overview of water systems for dust suppression and disc cooling during operation.
List of optional accessories available for the Power Cut, including order numbers.
General
