Makita DPC7311HD User Manual

1
WARNING!
Read and understand this Manual. Always follow safety precautions in the Instruction and
Safety Manual. Improper use can cause serious injury!
The engine exhaust from this product contains chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm. Preserve this Manual carefully!
Instruction and Safety Manual
for Gasoline Power Cuts
DPC7311HD
DPC7321HD

Makita DPC7311HD Specifications

General

Engine Type	2-Stroke
Blade Diameter	305 mm
Arbor Size	25.4 mm
Fuel Type	Gasoline
Power Source	Gasoline
Blade Diameter (mm)	305 mm
Power Output	3.7 kW (5.0 HP)

Summary

Delivery Inventory

Symbols

SAFETY PRECAUTIONS

Intended Use

Specifies the correct and incorrect uses of the Power Cut.

General Precautions

Provides essential safety rules for operating the Power Cut.

Protective Equipment

Details the mandatory personal protective gear for safe operation.

Fuels and Refuelling

Covers safe handling, mixing, and storage of fuel.

Putting into Operation Safely

Outlines initial steps and safety checks before starting.

Cutoff Disc Safety

Advises on proper selection and use of cutting discs.

Kickback and Lock-in Prevention

Explains hazards and methods to avoid kickback and lock-in.

Working Behavior and Methods

Describes correct posture, environment, and work techniques.

Cutting Metals

Cutting Masonry and Concrete

Transport and Storage

Maintenance Procedures

Changing the V-belt

Instructions for replacing the V-belt.

Air Filter Maintenance

Steps for cleaning or replacing the air filter.

Spark Plug Replacement

Procedure for replacing the spark plug.

Starter Cable Replacement

Guide for replacing the starter cable.

Cutting Attachment Adjustments

How to reposition the cutting attachment.

First Aid

Disposal and Environmental Protection

Technical Data

Denomination of Components

PUTTING INTO OPERATION

Mounting the Cutting Disc

Step-by-step guide for attaching the cutting disc.

V-belt Tensioning

Instructions for adjusting the V-belt tension.

Fuel Handling and Mixture

Details on fuel types, mixing ratios, and safe handling.

Refuelling Procedure

Steps for safely refuelling the Power Cut.

Starting the Engine

Covers cold starting, warm starting, and stopping procedures.

Adjusting the Carburetor

SPECIAL ACCESSORIES

Diamond Cutting Discs

Information on MAKITA diamond cutting discs.

Guide Trolley

Details on the guide trolley for easier cutting.

Water Tank System

Information on the water tank accessory.

Mains/Pressure Water System

Details on the mains water connection system.

Service, Spare Parts and Guarantee

Spare Parts

Information on using original MAKITA spare parts.

Guarantee

Troubleshooting