9 ENGLISH
Before the mandrel container becomes full, empty it
regularly by removing the mandrel container.
Available blind rivets
NOTICE: Using nose piece, jaw, jaw pusher, or pipe that does not match the mandrel diameter may cause
poor fastening, clogging of the mandrel, or malfunction of the tool.
Refer to the table below for the combination of rivet, nose piece, jaw, jaw pusher, and pipe.
NOTE: Some items in the table may be included in the tool package as standard accessories and some items in
the table are provided as optional accessories. They may differ from country to country.
For DRV150
Rivet Nose piece Mark on jaw Jaw pusher Pipe
Size Diameter of
mandrel
Mark on
nose piece
Hole
diameter
Hole
diameter
Color Hole
diameter
Color
ø2.4 mm
(3/32″)
ø1.4 -
1.6 mm
2.4 ø1.9 mm 4.8 ø1.9 mm Gray ø2.2 mm Silver
ø3.2 mm
(1/8″)
ø1.8 -
2.1 mm
3.2 ø2.4 mm 4.8 ø2.5 mm Black ø2.6 mm Black
ø4.0 mm
(5/32″)
ø2.2 -
2.6 mm
4.0 ø3.0 mm 4.8 ø3.1 mm Gray None * –
ø4.8 mm
(3/16″)
ø2.6 -
3.2 mm
4.8 ø3.6 mm 4.8 ø3.6 mm Black None * –
*. Pipe is not necessary for operation.
For DRV250
Rivet Nose piece Mark on jaw Jaw pusher Pipe
Size Diameter of
mandrel
Mark on
nose piece
Hole
diameter
Hole
diameter
Color Hole
diameter
Color
ø2.4 mm
(3/32″)
ø1.4 -
1.6 mm
2.4 ø1.9 mm 4.8 ø1.9 mm Gray ø2.2 mm Silver
ø3.2 mm
(1/8″)
ø1.8 -
2.1 mm
3.2 ø2.4 mm 4.8 ø2.5 mm Black ø2.6 mm Black
ø4.0 mm
(5/32″)
ø2.2 -
2.6 mm
4.0 ø3.0 mm 4.8 ø3.1 mm Gray ø3.4 mm Silver
ø4.8 mm
(3/16″)
ø2.6 -
3.2 mm
4.8 ø3.6 mm 4.8 or 6.4 ø3.6 mm Black ø4.1 mm Black
ø6.0 mm
(1/4″) *
ø3.1 -
3.5 mm
6.0 ø4.0 mm 6.4 ø4.0 mm Gray ø4.1 mm Black
ø6.4 mm
(1/4″) *
ø3.5 -
3.9 mm
6.4 ø4.4 mm 6.4 ø4.6 mm Black ø4.5 mm Silver
*. Stainless steel rivet is not available.
MAINTENANCE
CAUTION: Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE: Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
To Next Page
Loading...
Need help?
General
