Makita DUC302RF2 User Manual

7 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model DUC252 DUC302
Standard guide bar Guide bar length 250 mm 300 mm
Cutting length 23 cm 24 cm 28 cm
Type
Sprocket nose bar Carving bar Sprocket nose bar
Standard saw chain Type 91PX 25AP 90PX
Pitch 9.5 mm (3/8") 6.35 mm (1/4") 9.5 mm (3/8")
Gauge 1.3 mm (0.05") 1.3 mm (0.05") 1.1 mm (0.043")
No. of drive links 40 60 46
Sprocket Number of teeth 6 9 6
Pitch 9.5 mm (3/8") 6.35 mm (1/4") 9.5 mm (3/8")
Overall length (without guide bar) 316 mm
Net weight *1 4.1 kg
*2 4.6 kg 4.7 kg
Chain speed per minute 8.3 m/s (500 m/min)
Chain oil tank volume 85 cm
3
Rated voltage D.C. 36 V D.C. 36 V
• Due to our continuing program of research and development, the specications herein are subject to change with-
out notice.
• Specications and battery cartridge may di󰀨er from country to country.
*1 Weight, with largest battery cartridge, without guide bar and chain, empty oil tank, according to EN ISO 11681-2.
*2 Weight, with battery cartridge, guide bar, and chain, lled oil tank, according to EPTA-Procedure 01/2003.
WARNING: Use appropriate combination of the guide bar and saw chain. Otherwise personal injury may result.
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Wear eye protection.
Wear ear protection.
Wear a helmet, goggles and ear protection.
Use appropriate protection for foot-leg and
hand-arm.
This saw is to be used by properly trained
operators only.
Do not expose to rain.
Maximum permissible cut length
Direction of chain travel
Saw chain oil adjustment
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for cutting branches / pruning trees.
It is also suitable for tree service.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745-2-13:
Sound pressure level (L
pA
) : 84.4 dB (A)
Sound power level (L
WA
) : 95.4 dB (A)
Uncertainty (K) : 2.5 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745-2-13:
Model DUC252
Work mode : cutting wood
Vibration emission (a
h
) : 4.7 m/s
2
Uncertainty (K) : 1.5 m/s
2

Makita DUC302RF2 Specifications

General

Brand	Makita
Model	DUC302RF2
Category	Chainsaw
Language	English