EasyManua.ls Logo

Makita DVC560PT2 - Remaining Battery Capacity; Changing Operating Mode

Makita DVC560PT2
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11 ENGLISH
NOTE: This indicator does not work when the appli-
ance operates in "lower noise level (1)" mode.
NOTE: This indicator may not work depending on the
usage environment.
NOTE:
The indicator automatically goes out approxi-
matelyoneminuteaftertheapplianceisswitchedo󰀨.
Ifyouclearthecloggingofthelterbagandrestartthe
appliance, the indicator goes out even within one minute.
Brushroll error
Blinking The brushroll is under high
load for some reasons.
On The brushroll is stopped by
abnormal reason.
WARNING:
Immediately switch o󰀨 the appliance
when this lamp lights up during operation. Otherwise
themotormalfunctionmayoccurandcausere.
Remaining battery capacity
During operation, press the battery check / LED lamp
button to indicate the remaining battery capacities. The
battery indicators correspond to each battery.
Battery indicator status Remaining
battery
capacity
On
O󰀨
Blinking
50% to 100%
20% to 50%
0% to 20%
Battery indicator status Remaining
battery
capacity
On
O󰀨
Blinking
Charge the
battery
Battery check / LED lamp button
During operation, the following operations can be
performed.
Simply press the button to check the remaining
battery capacity.
• Pressandholdthebuttontoturnon/o󰀨theLED
lamp.
Switch action
1
2
1. ON / mode change button 2. OFF button
Turning on / o󰀨 the appliance
To start the appliance, simply push the ON / mode
changebutton.Toswitcho󰀨,pushtheOFFbutton.
CAUTION: Always put the head of the appli-
ance on the oor when turning on the appliance.
Otherwise an accident due to entanglement may
occurandcauseapersonalinjury.
Changing operating mode
You can change the operating mode in three steps:
"lower noise level (1)", "normal (2)", and "high (3)".
If you want to change operating mode, press the ON
/ mode change button when the appliance is running.
The operating mode switches in order "lower noise level
(1)" , "normal (2)" , and "high (3)".
The appliance will start in the same mode as the previ-
ous setting.

Related product manuals