Makita DVC560PT2 - Page 16

16 ENGLISH
2. Remove threads and hairs from the brushroll
using scissors.
Remove the cap and clean debris.
1
►1. Cap
3. Install the cap, brushroll, and bottom plate in
reverse order.
CAUTION: Attach the bottom plate com-
pletely. If the appliance is operated without the
bottomplate,thebrushrollmaycomeo󰀨andcause
injury.
NOTICE: Always attach the brushroll. Operating
the appliance without the brushroll results in poor
dust collecting.
How to clear the clog
NOTICE: Do not operate the appliance with the
intake ow path clogged. Continuous use with the
intakeowpathcloggedresultsinreducedsuction
power.
1. Remove the bottom plate, and then remove the
brushroll.
2. Remove the aluminum pipe from the appliance
and from the hose.
3. Turn the hose counterclockwise, and then remove
the hose from the appliance.
4. Remove the suction hose by pulling the tab.
1
2
►1. Suction hose 2. Tab
5. Inspecttheintakeowpathofairfortheinsideof
the aluminum pipe and the hose, and the suction hose.
Clean debris inside of them.
6. Align the tongue of the suction hose with the
groove in the housing and slip it into place.
1
2
►1. Tongue 2. Groove
7. Install the hose, aluminum pipe, brushroll, and
bottom plate.
CAUTION: Install the hose, pipe rmly.
Otherwisedustleakagemayoccurandcauseinjury.