How to solve warm start difficulties on Makita Chainsaw?
Warm start difficulties with your Makita Chainsaw are likely due to an incorrect carburetor adjustment. Adjust the carburetor correctly to resolve this issue.
What to do if my Makita EA3201S engine starts then dies immediately?
If your Makita Chainsaw engine starts but then dies immediately, this may be due to an incorrect idling adjustment, or a dirty suction head or carburetor. Try adjusting the idling and cleaning the suction head or carburetor.
Why is my Makita EA3201S Chainsaw chain not getting oil?
If your Makita Chainsaw chain isn't getting lubrication, the oil tank might be empty, the oil guide groove could be dirty, or the oil pump adjusting screw might be incorrectly adjusted. Refill the oil tank, clean the oil guide groove, and adjust the oil pump to resolve this.
How to fix warm start difficulties in Makita EA3201S?
Warm start difficulties with your Makita Chainsaw can be caused by a wrong carburetor adjustment. Adjust the carburetor to resolve this issue.
Why Makita EA3201S Chainsaw has insufficient power?
If your Makita Chainsaw isn't delivering enough power, the cause may be a dirty air filter, incorrect carburetor adjustment, a clogged muffler, a blocked exhaust channel in the cylinder, or a clogged spark arrester screen. To resolve this, clean or replace the air filter, adjust the carburetor settings, and clear any blockages in the muffler, exhaust channel, and spark arrester screen.
Why is there no chain lubrication in my Makita EA3201S?
If your Makita Chainsaw chain isn't getting lubrication, it could be due to an empty oil tank, a dirty oil guide groove, or an incorrectly adjusted oil pump. Refill the oil tank, clean the oil guide groove, and adjust the oil pump as needed.
What to do if my Makita EA3201S has insufficient power?
If your Makita Chainsaw has insufficient power, the air filter might be dirty, the carburetor might need adjustment, the muffler could be clogged, the exhaust channel in the cylinder might be blocked, or the spark arrester screen might be clogged. To resolve this, clean or replace the air filter, adjust the carburetor, and clear any obstructions in the muffler and exhaust channels.
General| Bar Length | 35 cm |
|---|---|
| Chain Pitch | 3/8 inch |
| Weight | 4.1 kg |
| Power Output | 1.35 kW |
| Fuel Tank Capacity | 0.4 L |
| Chain Gauge | 0.050 inch |
| Oil Tank Capacity | 0.28 L |
To Next Page
