What to do if my Makita EA5001P starts then dies?
If your Makita Chainsaw engine starts but dies immediately, the idling adjustment might be wrong, or the suction head or carburetor could be dirty. Adjust the idling and clean these components. Another possibility is a defective tank venting system, an interrupted fuel line, a defective cable, or a faulty combination switch. Inspect and repair these parts as needed.
How to unlock the chain on my Makita Chainsaw?
If the chain on your Makita Chainsaw does not run, it is possible that the chain brake is actuated. Release the chain brake.
How to fix insufficient power on my Makita Chainsaw?
If your Makita Chainsaw has insufficient power, the air filter might be dirty. Clean or replace it. The carburetor adjustment could also be incorrect, so adjust it. Additionally, the muffler, exhaust channel in the cylinder, or spark arrester screen may be clogged. Check and clean these components.
To Next Page
General
