To Next PageTo Next Page
Need help?Do you have a question about the Makita GA4041C and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Wheel Diameter | 100 mm (4") |
| Switch Type | Slide Switch |
| Vibration Control | Yes |
| Electronic Speed Control | Yes |
| Rated Voltage | 120V |
| No Load Speed | 11, 000 RPM |
| Arbor | 5/8 - 11 |
| Power Type | Electric |
| Spindle Thread | M10 |
