Makita GA4030K User Manual

1
INSTRUCTION MANUAL
MANUEL D'INSTRUCTION
MANUAL DE INSTRUCCIONES
DOUBLE INSULATION
DOUBLE ISOLATION
DOBLE AISLAMIENTO
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
AVERTISSEMENT:
Pour votre propre sécurité, prière de lire attentivement avant l'utilisation.
GARDER CES INSTRUCTIONS POUR RÉFÉRENCE ULTÉRIEURE.
ADVERTENCIA:
Para su seguridad personal, LEA DETENIDAMENTE este manual antes de usar la
herramienta.
GUARDE ESTAS INSTRUCCIONES PARA FUTURA REFERENCIA.
Angle Grinder
Meuleuse d'Angle
Esmeriladora de Disco
GA4030
GA4530
GA5030
009421

Makita GA4030K Specifications

General

Power Source	Corded Electric
No Load Speed	11, 000 RPM
Input Wattage	720 W
Rated Voltage	120V
Amperage	6.0 A
Spindle Thread	5/8 inch - 11 UNC
Overall Length	10.5 inches
Cord Length	8.2 ft (2.5 m)

Summary

Product Introduction and Safety Overview

Essential Safety Directives

Crucial safety warnings and instructions to read and save for personal safety and future reference.

Specifications and General Safety Rules

Model Specifications Comparison

Work Area and Electrical Safety

Guidelines for safe work environments and electrical precautions to prevent shock.

Personal Safety Guidelines

Personal safety measures, including alertness, protective gear, and proper operating conduct.

Power Tool Operation, Care, and Extension Cords

Usage, Maintenance, and Extension Cords

General Operation Safety Rules

Specific safety rules for general grinding, sanding, and cutting operations.

Specific Safety Rules - Advanced Topics

Accessory Safety and Handling

Safety guidelines for selecting, installing, and handling accessories, including protective equipment.

Kickback Prevention and Warnings

Detailed information and warnings about kickback and how to prevent it during operation.

Specific Safety Rules - Operations and Components

Grinding, Cutting, Sanding, Wire Brushing Safety

Wheel and Spindle Safety

Operation Precautions and Features

General Operation Precautions

Assembly Procedures

Wheel and Disc Mounting

Accessory Installation and Operation

Grinding, Sanding, and Brush Operation

Accessory Use and Maintenance

Wire Wheel Brush Operation