Need help?Do you have a question about the Makita GA4530R and is the answer not in the manual?
General| Spindle thread | M14 |
|---|---|
| Idle speed (max) | 11000 RPM |
| Sound power level | 96 dB |
| Sound pressure level | 85 dB |
| Grinding disc diameter | 115, 6.4 mm |
| Vibration level (sanding) | 2.5 m/s² |
| Vibration level (grinding) | 7.5 m/s² |
| Vibration level uncertainty (grinding) | 1.5 m/s² |
| Input power | 720 W |
| Power source | AC |
| Sound pressure level uncertainty | 3 dB |
| Product color | Black, Turquoise |
Weight and Dimensions| Width | 128 mm |
|---|---|
| Height | 103 mm |
| Length | 266 mm |
| Weight | 1800 g |
Details wheel diameter, spindle thread, speed, length, weight, and safety class for the angle grinder models.
Provides typical A-weighted noise and vibration emission data according to EN60745.
General safety advice for grinding, sanding, wire brushing, and cut-off operations.
Measures to avoid kickback during operation, including grip and body positioning.
Specific precautions for abrasive cutting operations, including wheel jamming and pressure.
Precautions to follow when performing sanding tasks, including disc selection.
Safety advice for using wire brushes, including guard use and bristle hazards.
Technique for applying the wheel or disc to the workpiece at an angle.
Guidelines for safely using cut-off and diamond wheels, including installation.
To Next Page
