To Next PageTo Next Page
Need help?Do you have a question about the Makita GA4542C and is the answer not in the manual?
Keep work area clean, avoid explosive atmospheres, keep bystanders away.
Use correct plugs, avoid grounded surfaces, protect from water.
Stay alert, use PPE, prevent unintentional starting, remove tools.
General safety precautions for various operations.
How to avoid kickback and related hazards.
Specific safety for grinding and cut-off operations.
Additional safety for cut-off operations.
Safety precautions for sanding operations.
Safety precautions for wire brushing operations.
Further safety advice for various operations.
Explanation of symbols used in the manual.
Mechanism to prevent spindle rotation during accessory changes.
How to operate the slide switch and lock it for continuous use.
Adjusting the rotating speed via a dial from 1 to 5.
Features like constant speed control, soft start, and overload protector.
Securely attaching the side grip to the tool.
Procedures for fitting wheel guards for different wheel types.
Procedures for fitting optional center wheels and discs.
How to install or remove abrasive discs.
How to install or remove flex wheels.
How to install or remove the dust cover attachment.
How to perform grinding and sanding operations.
How to use abrasive cut-off and diamond wheels.
How to use the wire cup brush accessory.
How to use the wire wheel brush accessory.
General
