ECHNICAL INFORMATION
T
Model No.
Description
March 2016
CONCEPT AND MAIN APPLICATIONS
1 / 25
Specification
Standard equipment
GA7060, GA7060R, GA7061, GA7061R /
GA9060, GA9060R, GA9061, GA9061R
Angle Grinder 180mm (7") /
Angle Grinder 230mm (9")
These models have been developed for heavy duty applications
such as foundry grinding.
The motor is more durable than that of our existing models with
the following improvements:
・Design of anti layer short of Armature (Commutator and its wire
connected portion)
・Low-absorbent motor housing to reduce water absorption
・Adoption of spiral spring type Brush holders yet with a compact body
SJS II (Super joint system II) for GA7061, GA7061R, GA9061 and
GA9061R provides increased machine durability by absorbing
the vibration produced by the wheel grinding or cutting material.
Dimensions: mm (")
Width (W)
Height (H)
Length (L)
Model
450 (17-3/4)
200 (7-7/8)
144 (5-5/8)/
145 (5-3/4)
250 (9-7/8)
L
H
Continuous Rating (W)
Voltage (V) Cycle (Hz)
Input Output
Max Output (W)
110 15 1,65050/60
15 N/A50/60
10 2,20050/60
9.6 2,200
800
800
1,400
1,400
2,200
2,200
3,000
3,00050/60
120
230
240
10.5 2,20050/60 1,400 3,000220
Current (A)
Optional accessories
Anti vibration grip
Toolless lock nut
Dust cover attachment
Toolless wheel cover
W
Max thickness 6.5 (1/4)
Shock absorbing system Yes (SJS II)No
2.5 (8.2), 2.0 (6.6) for Brazil and Australia
Side grip
Lock nut wrench
Note: The standard equipment may vary by country or model variation.
Abrasive discs
Lock nut release socket
Plastic carrying case
*1 Triaxial vector sum. According to EN60745-2-3. *2 With Side grip, Wheel cover, Lock nut, Inner flange
Model No.
Specification
Soft start
Anti-restart function
Protection against electric shock
Power supply cord: m (ft)
Wheel size:
mm (")
Diameter
Hole diameter
6,6008,500
GA7060, GA7060R/
GA7061, GA7061R
GA9060, GA9060R/
GA9061, GA9061R
No/ Yes
No/ Yes
No/ Yes
No/ Yes
Double insulation
180 (7)
22.23 (7/8)
230 (9)
6,6008,500
180 (7) 230 (9)
5.5 (12.1)/
5.6 (12.4)
5.3 (11.7)/
5.4 (11.9)
5.7 (12.6)/
5.7 (12.6)
5.5 (12.1)/
5.5 (12.1)
Weight according to EPTA-
Procedure 01/Ver.2.1*2: kg (lbs)
No load speed: min
-ı
= rpm
Electronic
control
GA9060/GA9060R GA9061/GA9061RGA7060/GA7060R GA7061/GA7061R
144 (5-5/8)/
145 (5-3/4)
Vibration level*1: m/s
2
7.5 6.5 6.57.0
Wheel cover
Flap disc 180 (Grit: 16, 20, 24, 30, 50, 80, 100, 120)
Rubber pad
Wire cup brush
OFFICIAL USE
for ASC & Sales Shop
To Next Page
Need help?
General
