To Next PageTo Next Page
Need help?Do you have a question about the Makita GA9020S and is the answer not in the manual?
General| Power Input | 2200 W |
|---|---|
| Disc Diameter | 230 mm |
| No Load Speed | 6600 rpm |
| Vibration Level | 7.5 m/s² |
| Sound Pressure Level | 91 dB(A) |
| Sound Power Level | 102 dB(A) |
| Wheel Diameter | 230 mm |
| Voltage | 230 V |
| Net Weight | 5.8 kg (12.8 lbs) |
| Spindle Thread | M14 |
| Weight | 5.8 kg |
| Arbor Size | 22.23 mm |
Explains symbols used in the manual for safe operation.
Defines the tool's purpose for grinding, sanding, wire brushing, etc.
Details power requirements and double insulation features.
Provides crucial warnings regarding noise exposure and protective measures.
Details vibration levels for surface grinding using a normal side grip.
Details vibration levels for surface grinding using an anti-vibration side grip.
Details vibration levels for disc sanding using a normal side grip.
Details vibration levels for disc sanding using an anti-vibration side grip.
General safety instructions applicable to all power tools.
Specific safety warnings for grinding, sanding, wire brushing, and cutting-off operations.
Explains kickback and provides precautions to avoid it.
Safety guidelines for grinding and cutting-off operations.
Additional safety guidelines specifically for cutting-off operations.
Safety guidelines for sanding operations.
Safety guidelines for wire brushing operations.
General additional safety warnings and precautions for usage.
Explains the function and operation of the shaft lock.
Describes the different switch actions and patterns.
Details the soft start feature for specific models.
Instructions for securely installing the side grip.
Guides on fitting and removing the wheel guard for various wheels.
Instructions for installing/removing depressed center wheels or flap discs.
Instructions for installing/removing flex wheels, including guard usage.
Instructions for installing/removing abrasive discs with rubber pad.
Information about the Super flange accessory.
Instructions for installing/removing the Ezynut accessory.
Instructions for installing cut-off or diamond wheels with specific guards.
Instructions for installing wire cup brushes, noting safety.
Instructions for installing wire wheel brushes, noting safety.
Instructions for installing hole cutters.
Instructions for installing dust collecting guard for grinding applications.
Instructions for installing dust collecting guard for cutting-off applications.
Instructions for installing or removing the dust cover attachment.
Instructions for performing grinding and sanding operations.
Guidelines for operating with cut-off or diamond wheels.
Guidelines for operating with wire cup brushes.
Guidelines for operating with wire wheel brushes.
Guidelines for operating with hole cutters.
Instructions for cleaning the tool's air vents.
Step-by-step guide for replacing worn carbon brushes.
