7
English
spot too long to prevent igniting the
-
Stationary use
This tool can also be used in stationary mode.
Q Place the tool onto a stable workbench.
Q Secure the cable to prevent pulling the tool off the
workbench.
Q Carefully switch the tool on.
Cooling down
The nozzle and accessory become very hot during use.
Let them cool down before attempting to move or store
the tool.
Q To reduce the cooling time, switch the tool on at
the lowest air temperature setting and let it run for
a few minutes.
Q Switch the tool off and let it cool down for at least
30 minutes. Always place it vertical and standing.
MAINTENANCE AND CLEANING
Attention:
Maintenance
Q Your Power Tool has been designed to operate
over a long period of time with a minimum of
maintenance. Continuous satisfactory opera-
tion depends upon proper tool care and regular
cleaning.
Lubrication
Q Your power tool requires no additional lubrication.
Cleaning
Q Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.
Cleaning
Q Keep the ventilation slots of the machine clean to
prevent overheating of the motor.
Q Regularly clean the machine housing with a soft
cloth, preferably after each use.
Q Keep the ventilation slots free from dust and dirt.
Q If the dirt does not come off use a soft cloth moist-
ened with soapy water.
TECHNICAL DATA
Model No:
HG5030 HG6031V HG6030
Voltage 220-240V~50Hz 220-240V~50Hz 220-240V~50Hz
1600W 1800W 1800W
Temperature
I 350°C 300L/M
II 500°C 500L/M
I 50-400°C 250L/M
II
100-600°C
500L/M
I 50°C 250L/M
II 300°C 250L/M
III 600°C 500L/M
Overall length
233mm 257mm 233mm
0.56kg 0.67kg 0.57kg
ENVIRONMENT
Should your appliance need replace-
ment after extended use, do not discard
it with the household rubbish but dispose
of it in an environmentally safe way.
Waste produced by electrical machine
items should not be handled like nor-
mal household rubbish. Please recycle
where facilities exist. Check with your
Local Authority or retailer for recycling
advice.
Subject to change without notice.
To Next Page
Loading...
Need help?
General
