To Next PageTo Next Page
Need help?Do you have a question about the Makita HK0500 and is the answer not in the manual?
General| Input power | 550 W |
|---|---|
| Power source | AC |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Impact energy (max) | 1.8 J |
| Chuck type | SDS Plus |
| Adjustable speed | Yes |
Weight and Dimensions| Weight | 3000 g |
|---|
Comprehensive safety guidelines for all tools, covering work area, electrical, and personal safety.
Guidelines for maintaining a safe and clear workspace to prevent accidents.
Essential safety measures related to electrical power and tool usage.
Recommendations for operator conduct and protective measures for personal safety.
Guidelines for proper tool usage, maintenance, and accessory selection.
Instructions for ensuring maintenance is performed by authorized and qualified personnel.
Guidance on using identical replacement parts and following maintenance instructions.
Critical safety advice for handling the tool, including electrical, vibration, and cold weather use.
Details on how to operate the tool's switch trigger for starting and stopping.
Instructions on using the adjusting dial to control the tool's speed and blows per minute.
Explanation of various symbols used in the manual for tool identification and operation.
Explanation of how the speed adjusting dial controls the blows per minute.
Step-by-step guide for safely inserting and removing the tool's bit.
Procedure for setting and securing the bit at 12 different angles.
Instructions on how to properly position and operate the tool for chipping tasks.
Guidance on maintaining product safety and reliability through authorized service centers.
List of recommended accessories for use with the tool to ensure safety and proper function.
Information on the warranty coverage, exclusions, and limitations for Makita tools.
