Need help?Do you have a question about the Makita HK1820 and is the answer not in the manual?
General| Power | 550 W |
|---|---|
| Idle speed | 3200 RPM |
| SDS system | Yes |
| Cord length | 5 m |
| Product color | Cyan, Green |
| Power source | AC |
| Impact rate | 3200 bpm |
| Sound power level | 94 dB |
| Impact energy (max) | 3.1 J |
| Sound pressure level | 83 dB |
| Vibration level (chiseling) | 10 m/s² |
| Drilling diameter in concrete (max) | - mm |
Weight and Dimensions| Weight | 3400 g |
|---|
Describes the intended applications for the power tool, such as chiselling concrete, brick, and stone.
Details requirements for connecting the tool to a power supply, emphasizing voltage and AC supply compatibility.
Provides typical A-weighted noise levels (sound pressure and power) and uncertainty according to EN60745.
Guidelines for maintaining a safe and well-lit work environment, avoiding hazardous atmospheres, and keeping bystanders clear.
Instructions on proper plug usage, avoiding earthed surfaces, and protecting the tool from rain or wet conditions.
Emphasizes staying alert, using personal protective equipment, preventing unintentional starting, and maintaining balance.
Advice on using the correct tool, not forcing it, disconnecting power before adjustments, and maintaining the tool.
Recommends qualified personnel for repairs and using only identical replacement parts to maintain safety.
Explains how to operate the switch trigger for starting, stopping, and continuous operation of the tool.
Details how to adjust the blows per minute using the adjusting dial and provides a table of settings.
Describes how to adjust the angle of the bit using the change ring for different chiselling applications.
Explains the use of the hook for securing the power supply cord connection to an extension cord.
Step-by-step instructions for inserting and removing bits, including cleaning the shank and securing the bit.
To Next Page
