Makita HK0500 Technical Information

T
ECHNICAL INFORMATION
For Models
HK0500
Standard equipment
Optional accesories
Scaling chisel
Bull point 14-250
Cold chisel 20-250
Scaling chisel 38-200
Grease for Bit
Grease for Hammer
New Tool
CONCEPTION AND MAIN APPLICATIONS
Model HK0500 exclusively for SDS-Plus Bit , developed for fine
chipping works, such as tearing up tiles, joints, and mortar in re-
construction sites.
We have put Motor laterally and made the Barrel thickness to be
suitable for gripping so that tile tearing works may be easier. In
Chuck structure, one-touch sliding system has been applied, which
you can attach only by inserting Bit and searching grooves.
Moreover, your fingers will not be exhausted in continuous operations
owing to Large switch and Large D-shape handle. At the top end, a
very effective dust-proof cap with lip has been applied.
Motor Series commutator motor ( 72 type 25 )
2000~3500 bpmBlows per minute
Specifications
Voltage (V) Current(A) Cycle(Hz)
Input
Max. output(W)
output
100 5.8
5.0
2.6
2.5
2.4
50/60 550
550
550
550
550
260
260
260
260
260
500
500
500
500
500
115 50/60
220 50/60
230 50/60
240 50/60
Description
Power Scraper
Continuous Rating(W)
468mm(18-1/2")
174mm(6-7/8")
83mm(3-1/4")

Makita HK0500 Specifications

General

Input power	550 W
Power source	AC
AC input voltage	230 V
AC input frequency	50 Hz
Impact energy (max)	1.8 J
Chuck type	SDS Plus
Adjustable speed	Yes

Weight and Dimensions

Weight	3000 g