To Next PageTo Next Page
Need help?Do you have a question about the Makita JR3070CT and is the answer not in the manual?
General| Soft grip | Yes |
|---|---|
| Product color | Black, Blue |
| Protection class | II |
| Number of blades | 3 |
| Stroke length | 32 mm |
| Cutting depth in wood | 255 mm |
| Idle stroke rate (max) | 2800 spm |
| Idle stroke rate (min) | 0 spm |
| Cutting depth in metal profiles/pipes | 130 mm |
| Input power | 1510 W |
| Power source | AC |
| Speed control type | Mechanical |
Weight and Dimensions| Width | 485 mm |
|---|---|
| Weight | 4600 g |
Details the tool's intended purpose for sawing wood, plastic, metal, and building materials.
Outlines connection voltage, single-phase AC supply, and double insulation benefits.
Presents A-weighted noise pressure and power levels for both models per EN62841-2-11.
Lists declared tri-axial vibration values for models JR3060T and JR3070CT based on work modes.
Confirms inclusion of the EC declaration of conformity as Annex A for European compliance.
Crucial safety instructions specific to operating recipro saws, covering handling, workpiece security, and personal protection.
Explains how to adjust the tool's shoe for optimal blade use and five-way repositioning.
Describes how to select between straight line and orbital cutting actions for varied applications.
Details the operation of the switch trigger, lock button, and speed control for starting and continuous use.
Step-by-step instructions for securely installing and removing the saw blade, with safety precautions.
Guide to using the speed adjusting dial on the JR3070CT for optimal cutting speed based on material.
Explains the electronic control that maintains consistent speed, ensuring a fine finish under load.
Describes the soft start function which reduces initial torque for safer operation and tool longevity.
Instructions for checking carbon brush wear and replacing them when worn down to the limit mark.
