Makita MAC700 User Manual

OWNERS MANUAL FOR
Oil Lubricated Air Compressor
MODEL No
MAC700
SPECIFICATION CHART
Model # MAC700
Horsepower 2
SCFM @ 40 PSIG 3.8
SCFM @ 90 PSIG 3.3
Cut-In Pressure 100 PSI
Cut-Out Pressure 130 PSI
Bore 47 mm
Stroke 44 mm
Voltage -Single Phase 120
Motor RPM 1720
Amperage @ max pressure 12.4
Tank Size 2.6 Gallon
CSA/US Listed Yes
Minimum Circuit Requirement: 15 AMPS
*A circuit breaker is preferred. Use only a fuse or circuit
breaker that is the same rating as the branch circuit the air
compressor is operated on. If the air compressor is connected
to a circuit protected by fuses, use time delay fuses.
IMPORTANT — Read the Safety Guidelines and ALL
instructions carefully before operating.
www.makitatools.com

Makita MAC700 Specifications

General

Horsepower	2.0 HP
Tank Capacity	2.6 gallons
Max Pressure	130 PSI
CFM at 90 PSI	3.3 CFM
Pump Type	Oil-lubricated
Weight	52 lbs
Type	Portable
CFM at 40 PSI	3.8 CFM
Pump Material	Cast iron
Voltage	120V