Need help?Do you have a question about the Makita RP1800 and is the answer not in the manual?
General| Product color | Black, Green |
|---|---|
| Adjustable speed | No |
| Collet capacity | 6.35 (1/4\ |
| Idle speed (max) | 22000 RPM |
| Amperage | 15 A |
| Power source | AC |
Weight and Dimensions| Height | 298.45 mm |
|---|---|
| Weight | 6078 g |
| Package weight | 8618.255 g |
Lists the router models (RP1800, RP1801, RP2300FC) and displays an image of the tool.
Emphasizes reading and understanding the manual before use and saving for future reference.
Details technical specifications like capacity, speed, and weight for various router models.
Explains symbols such as double insulation and defines the tool's intended use for trimming and profiling.
Discusses voltage requirements, double insulation, and mains impedance for optimal operation.
Quantifies noise levels (dB) and vibration emissions (m/s²) for different router models according to EN60745.
Manufacturer's declaration of compliance with European Directives for the router models.
Provides initial crucial warnings regarding electric shock, fire, and injury prevention.
Covers maintaining a clean work area, electrical safety, and personal protective equipment.
Details safe handling, preventing unintentional starts, and proper tool maintenance.
Specific safety measures for operating the router, including grip, bit contact, and feed direction.
Introduces the tool's main functions and the process for adjusting the depth of cut.
Explains the function of the stopper block and nylon nut for depth control and upper limit adjustment.
Details how to operate the switch, including lock functions, and electronic features like constant speed control.
Describes the speed adjusting dial and the integrated lighting feature for specific models.
Step-by-step instructions on securely installing and removing router bits using the shaft lock and wrench.
Outlines the general steps for operating the router, including bit engagement and movement.
Instructions on how to install and use the straight guide for precise straight cuts.
Details on adjusting the blade positioning and altering the guide shoe width.
Instructions for attaching the router's base mounting unit to the guide holder rods.
Guide for installing and using the templet guide to follow patterns for precise cuts.
Instructions for using the trimmer guide for curved cuts and working with veneers.
Steps for installing the dust nozzle set for efficient dust extraction.
Describes using a specific screw for fine adjustments of depth when the router is on a table.
Explains fine depth adjustments using a screw from above the table.
Procedure for checking and replacing worn carbon brushes to maintain tool performance.
A list of recommended accessories and attachments for use with the router.
Provides dimensions (D, A, L1, L2) for various straight router bits.
Details dimensions (D, A, L1, L2, R) for U-grooving and V-grooving router bits.
Specifications for flush trimming, corner rounding, and ball bearing flush trimming bits.
Specifications for board-jointing, cove beading, and ball bearing corner rounding bits.
Specifications for ball bearing chamfering and Roman ogee router bits.
Specifications for ball bearing beading and cove beading router bits.
To Next Page
