To Next PageTo Next Page
Need help?Do you have a question about the Makita SA5040C and is the answer not in the manual?
General| Type | Random Orbit Sander |
|---|---|
| Power Source | Corded Electric |
| Orbit Diameter | 5/32 inches |
| Speed | 4, 000 - 12, 000 OPM |
| Weight | 3.5 lbs |
| Dust Collection | Yes |
| No Load Speed | 4, 000 - 12, 000 OPM |
| Variable speed control dial | Yes |
| Voltage | 120V |
| Pad Size | 5 inches |
| Abrasive Disc Size | 5 inches |
| Power Type | Corded Electric |
Common safety warnings for grinding, sanding, wire brushing, and cut-off operations.
Maintain firm grip, proper body position, and avoid saw blades to prevent kickback.
Use recommended wheels, guards, and apply them only for designated purposes.
Follow rules for wheel selection, setup, and avoid improper accessories.
Adhere to safe practices regarding workpiece, tool operation, and personal protection.
Guidance on installing grips, pads, discs, guards, and converting for grinder use.
Instructions for installing various wheel guards and flanges.
Procedures for mounting wheels, discs, and optional accessories like Ezynut.
Proper techniques for performing grinding, sanding, and cut-off operations.
