Need help?Do you have a question about the Makita DBO180 and is the answer not in the manual?
General| Depth | 175 mm |
|---|---|
| Width | 123 mm |
| Height | 153 mm |
| Weight | 1700 g |
| Operating time | - min |
| Battery voltage | 18 V |
| Dust extraction port | Yes |
| Power source | Battery |
| Eccentricity | 1.4 mm |
| Idle speed (max) | 11000 RPM |
| Idle speed (min) | 7000 RPM |
| Oscillating orbit diameter | 2.8 mm |
| Uncertainty K | 1.5 m/s² |
| Dust container type | Dust bag |
Weight and Dimensions| Sanding disc diameter | 125 mm |
|---|
Details the declared sound pressure and uncertainty levels for the tool models.
Advises on actual use variations and safety measure identification for vibration.
Emphasizes reading all safety warnings and instructions for safe operation.
Instructions on plugs, cords, wet conditions, and grounding to prevent shock.
Advice on staying alert, using PPE, preventing unintentional starts, and maintaining balance.
Focuses on avoiding complacency, wearing protective gear, and employer responsibility.
Do not disassemble, stop if operating time shortens, and handle electrolyte carefully.
Avoid touching terminals, storing with metal, or exposing to water to prevent fire.
Detailed steps and cautions for safely installing and removing the battery cartridge.
Instructions on starting, stopping, and cycling through speed modes using the button.
Warns against switching on the tool when it is in contact with the workpiece.
Guidance on holding the tool, applying pressure, and keeping the pad flush during sanding.
To Next Page
