Need help?Do you have a question about the Makita SP6000 and is the answer not in the manual?
General| Soft start | Yes |
|---|---|
| Product color | Black, Blue |
| Power protection features | Overload |
| Diamond disc | - |
| Vibration emission | 2.5 m/s² |
| Cross stop tilt angle range | -1 - 48 ° |
| Idle speed (max) | 6400 RPM |
| Idle speed (min) | 2000 RPM |
| Blade diameter (max) | 165 mm |
| Blade diameter (min) | 160 mm |
| Cutting depth (45º) | 40 mm |
| Cutting depth (90º) | 56 mm |
| Sound pressure level | 92 dB |
| Input power | 1300 W |
| Cable length | 4 m |
| AC input voltage | 230 V |
Weight and Dimensions| Depth | 346 mm |
|---|---|
| Width | 225 mm |
| Height | 252 mm |
| Weight | 4400 g |
Key symbols like 'Read Instruction Manual' and 'Double Insulation'.
Information on vibration emission levels during operation.
Guidelines for maintaining a clean, well-lit, and hazard-free workspace.
Precautions regarding power supply, plugs, and grounding.
Recommendations for operator alertness, protective equipment, and preventing unintentional starts.
Instructions for proper tool usage, maintenance, and storage.
Guidance on servicing, lubrication, and accessory replacement.
Rules for safe handling, workpiece support, blade use, and kickback avoidance.
Procedure for setting the blade cutting depth for optimal results.
Instructions on how to perform cuts at an angle.
How to adjust the saw for right and left tilting cuts.
Aligning the tool base with cutting lines for straight and bevel cuts.
How to use the lock-off button and switch trigger.
Using the dial to set infinite speed adjustments from 2,000 to 5,200 RPM.
Location and use of the integrated hex wrench.
Step-by-step guide for changing the saw blade.
Technique for making straight cuts, avoiding force and kickback.
How to attach a vacuum cleaner for dust extraction.
Instructions for precise cutting using an accessory guide rail.
Performing bevel cuts while using the guide rail.
Using the rip fence for accurate straight cuts and repeated widths.
Techniques for making plunge cuts, including safety precautions.
Using miter gauges and clamps for precise work.
How to ensure accuracy for standard angle cuts.
Procedure for checking and replacing worn carbon brushes.
List of recommended accessories for use with the tool.
To Next Page
