Need help?Do you have a question about the Makita SP6000J and is the answer not in the manual?
General| Input power | 1300 W |
|---|---|
| Output power | 750 W |
| Power source | AC |
| Blade diameter | 165 mm |
| Idle speed (max) | 5800 RPM |
| Sound power level | 102 dB |
| Blade diameter (min) | 20 mm |
| Cutting depth (45º) | 40 mm |
| Cutting depth (90º) | 57 mm |
| Sound pressure level | 91 dB |
| Sound level uncertainty | 3 dB |
| Saw blade included | Yes |
| Diamond disc | No |
| Uncertainty K | 1.5 m/s² |
| Vibration emission | 2.5 m/s² |
| Product color | Black, Blue |
| Protection class | II |
| Product type | Compact saw |
Weight and Dimensions| Depth | 346 mm |
|---|---|
| Width | 225 mm |
| Height | 252 mm |
| Weight | 4400 g |
Details on model, blade diameter, cutting depth, speed, length, and weight.
Guidelines for safe work area setup and electrical precautions during tool operation.
Recommendations for operator alertness, protective equipment, and proper body positioning.
Instructions on proper tool usage, avoiding force, and checking guards and blades.
Guidance on servicing, lubricating, and keeping parts clean for safe operation.
Key safety warnings related to blade contact, workpiece support, and depth adjustment.
Detailed explanation of kickback causes and methods for operator prevention.
Procedure for setting the cutting depth using the clamping screw and stopper.
Functionality of the quick stop button for specific depth cuts with a guide rail.
Instructions for setting bevel angles and tilting the saw for various cuts.
Guidance on aligning the saw base with the cutting line for different cut types.
Steps for setting up and using the tool with a guide rail accessory.
How to operate the switch trigger and lock-off button for starting and stopping.
Using the dial to adjust the infinite speed control for different materials.
Explanation of overload protector, constant speed control, and soft start features.
Location and method for storing the hex wrench on the tool.
Step-by-step guide for removing and installing saw blades safely.
Instructions for fitting and positioning the dust bag accessory.
How to connect a vacuum cleaner for clean cutting operations.
Technique for performing straight cuts, including starting and advancing the tool.
Procedure for placing the tool on the guide rail and adjusting for smooth cuts.
Using rip fence for straight cuts and guide devices for miter cuts.
Safety instructions and method for performing plunge cuts.
Procedure for adjusting the accuracy of 90° and 45° cuts.
Instructions for checking and replacing worn carbon brushes.
Information on warranty coverage, exclusions, and limitations.
To Next Page
