To Next PageTo Next Page
Need help?Do you have a question about the Makita SP6000J1 and is the answer not in the manual?
General| Input power | 2000 W |
|---|---|
| Cable length | 4 m |
| Output power | 1200 W |
| Blade bore | 20 mm |
| Blade diameter | 165 mm |
| Idle speed (max) | 5800 RPM |
| Sound power level | 102 dB |
| Vibration emission | 2.5 m/s² |
| Cutting depth (45º) | 40 mm |
| Cutting depth (90º) | 57 mm |
| Sound pressure level | 91 dB |
| Sound level uncertainty | 3 dB |
| Diamond disc | - |
| Saw blade included | Yes |
Weight and Dimensions| Depth | 346 mm |
|---|---|
| Width | 225 mm |
| Height | 252 mm |
| Weight | 4400 g |
Safety guidelines for performing cuts with the circular saw, focusing on hand placement and workpiece support.
Explanation of kickback phenomena and essential precautions to prevent it during operation.
Instructions for checking and ensuring the proper operation of the saw's safety guard.
Further safety precautions for specific cutting situations and tool handling.
Utilizing the quick stop button for precise shallow cuts to prevent splintering.
Guides for adjusting the saw for precise bevel cuts to the left and right.
Methods for aligning the saw with the cutting line for straight and bevel cuts.
Proper operation of the switch trigger and lock-off button for safe use.
Instructions on how to adjust the tool's speed for different cutting applications.
Guidance on storing the hex wrench for convenient access.
Steps for safely removing and installing the saw blade.
Procedure for adjusting the saw for precise 90° and 45° cuts.
Instructions for checking and replacing worn carbon brushes.
