Need help?Do you have a question about the Makita TD022D and is the answer not in the manual?
General| Brand | Makita |
|---|---|
| Model | TD022D |
| Category | Impact Driver |
| Language | English |
Read all safety warnings, instructions, illustrations and specifications. Failure to follow may result in shock, fire, or injury.
Switch off tool, hold firmly, press buttons to remove, align tongue to install until it clicks.
System cuts off power to extend battery life. Stops automatically on low battery voltage.
Set lock lever to locked position to prevent switch actuation. Unlocked position allows switch operation.
Check switch function and rotation direction. Move lock lever to unlocked, then set switch for CW/CCW rotation.
Move lock lever to unlocked position, then rotate switch slightly to turn lamp on/off. Do not look directly at light.
Use correct bit type. Pull sleeve to install/remove bit. Ensure bit is firmly secured.
Tool can be used in straight or pistol shape. Do not hold bendable part when changing shape.
Torque differs by screw, material, etc. Figures show relation between torque and time for standard/high tensile bolts.
To Next Page
