Makita VC4210L - User Manual

Need help?

Do you have a question about the Makita VC4210L and is the answer not in the manual?

Summary

Bedienelemente (Operating Elements)

Safety Instructions

Symbols and Usage Guidelines

Explains warning symbols, safe usage, and intended purpose.

Electrical Safety and Extension Leads

Covers safe electrical connection, RCDs, and extension lead requirements.

Important Warnings and Guarantees

Lists critical safety advice, usage restrictions, and guarantee information.

Risks and Hazards

Electrical and Dust Hazard Risks

Warns about electrical component risks and hazardous dust.

Atmosphere and Parts Risks

Addresses risks in flammable atmospheres and the importance of genuine spare parts.

Control and Operation

Machine Startup and Basic Operation

Details steps for starting and operating the machine correctly.

Advanced Operation Features

Covers Auto-On/Off socket, AutoClean, antistatic connection, and cooling filter.

Wet and Dry Pick-up Procedures

Provides procedures and precautions for vacuuming liquids and hazardous dry materials.

After Using the Machine

Post-Use, Transport, and Storage

Covers unplugging, cord winding, transportation, and storage guidelines.

Accessory Storage

Details accessory storage methods using integrated rails and straps.

Maintenance

Servicing, Inspection, and Tasks

Covers requirements for regular servicing, inspections, and general maintenance tasks.

Machine Recycling Instructions

Instructions for proper disposal and recycling of the old machine.

Further Information

EU Declaration of Conformity

Declares compliance with EU directives and standards.

Technical Specifications

Lists technical specifications of the vacuum cleaner.

The Makita VC4210L is a wet and dry vacuum cleaner designed for professional use, offering robust performance and a range of features for efficient cleaning and dust extraction.

Function Description:

The VC4210L is primarily used for vacuuming both dry materials and liquids. It is equipped with an automatic filter cleaning system (AutoClean) to maintain optimal suction performance during operation. This system periodically cleans the filter, and a manual filter cleaning operation is also recommended for extensive dust applications or when suction power decreases. The machine can be used for general cleaning tasks or connected to power tools for dust extraction at the source. It features an appliance socket with permanent power on, allowing it to function as an extension cord, and an AUTO mode where it switches on and off synchronously with the connected power tool. The vacuum is designed to handle various types of dust, including hazardous dust, with appropriate filtration.

Important Technical Specifications:

The VC4210L operates on a mains voltage of 220-240V (EU/FR/RU, AU/NZ, CH, GB) or 110-120V (CA/US/MX) at 50/60 Hz. Power consumption varies by region, with typical values around 1100W for EU/FR/RU and 1000W for CA/US/MX. The total connected load can be up to 2400W (EU/FR/RU) or 1700W (CA/US/MX). The fuse rating is 16A (EU/FR/RU) or 15A (CA/US/MX). It boasts a significant volume flow (air max) of approximately 4500 l/min (EU/FR/RU) or 230 (252) (CA/US/MX) and a vacuum pressure of about 250 (250) mbar (kPa). Sound level is around 62 dB(A) for sound pressure and 72 dB(A) for sound power. The machine has a dust class rating of L, indicating suitability for picking up dry, non-flammable dust with an OEL (Occupational Exposure Limit) value > 1mg/m³. The power cord length is typically 7.5 meters, with a cross-section of H07RN-F 3G1.5 mm² (EU/FR/RU) or SJTW-A 3AWG16 (CA/US/MX). It has an IP44 protection type. The tank volume is 42 liters. The dimensions are approximately 575 mm (height), 505 mm (width), and 385 mm (depth), with a weight of about 16.0 kg.

Usage Features:

The vacuum cleaner is designed for ease of use and versatility.

Assembly and Setup: The hose connects to the suction inlet by pushing it firmly into place. Tubes connect to the hose handle and are twisted to ensure a proper fit. Various nozzles can be attached depending on the material to be picked up.
Operation Modes:
- "I" (On): Activates the machine for continuous operation.
- "/0" (Off): Stops the machine and provides permanent power to the appliance socket.
- "AUTO": Activates Auto-On/Off operation, where the vacuum starts and stops with a connected power tool.
- "I + AutoClean Off": Activates the machine with deactivated automatic filter cleaning.
- "AUTO + AutoClean Off": Activates Auto-On/Off operation with deactivated automatic filter cleaning.
Suction Power Control: A separate turning knob allows for adjustment of suction power.
AutoClean System: This system automatically cleans the filter during operation. For manual cleaning, the machine should be switched off, nozzles or hose opening closed with the palm, and then switched to "I" for about 10 seconds at full speed.
Antistatic Connection: An integrated antistatic system in the motor top discharges static electricity that may develop during dust pick-up, connecting to the inlet fitting of the container. Use of an electrical conductive or antistatic suction hose is recommended.
Appliance Socket: An integrated socket allows connection of external power tools, enabling synchronized operation in AUTO mode. Only approved dust-producing tools should be connected.
Storage: The machine should be stored indoors, protected from rain and frost. It includes features for convenient transport and storage of accessories, such as integrated rails for side attachment of accessories and hooks for hose and mains cable. An optional adapter plate allows fastening of storage cases on top.

Maintenance Features:

Regular maintenance is crucial for the longevity and safe operation of the VC4210L.

Filter Maintenance:
- The machine uses a flat filter (PTFE) and fleece filter bags.
- Filters should be checked regularly and cleaned or replaced when suction performance decreases.
- The motor cooling air filter (PET) should be cleaned regularly to protect electronics and the motor. An optional cooling air filter cartridge is recommended for areas with high concentrations of fine dust.
General Cleaning: Keep the machine clean with a dry cloth and a small amount of spray polish.
Regular Servicing: Qualified personnel should perform regular servicing and inspection in accordance with relevant legislation. This includes electrical tests (earth continuity, insulation resistance, flexible cord condition).
Damage and Repair: If the machine is not working properly, has been dropped, damaged, or exposed to water, it should be returned to a service center or dealer. Any electrical or mechanical damage should be repaired by a competent service center or the manufacturer.
Disposal: The machine should be unplugged, and the power cord cut before disposal. Electrical appliances should not be discarded with household waste but collected separately and recycled ecologically.
Hazardous Materials: When handling hazardous materials, ensure proper ventilation, wear protective clothing, and clean the maintenance area. Contaminated parts that cannot be cleaned must be packed in sealed bags and disposed of according to valid regulations.