To Next Page
G
Gary WolfSep 12, 2025
What to do if the chain does not run on my Makita Chainsaw?
- TTrevor CohenSep 12, 2025
If the chain on your Makita Chainsaw isn't running, the chain brake might be activated. Try releasing the chain brake.
What to do if the chain does not run on my Makita Chainsaw?
If the chain on your Makita Chainsaw isn't running, the chain brake might be activated. Try releasing the chain brake.
Why is my Makita XCU02 having abnormal vibration?
If you experience abnormal vibration with your Makita Chainsaw, stop the machine immediately! Check if the guide bar or saw chain is loose and adjust the tension. If the issue persists, it could be a tool malfunction, requiring repair from an authorized service center.
What to do if chain does not stop even the chain brake is activated on my Makita XCU02 Chainsaw?
If the chain on your Makita Chainsaw doesn't stop even when the chain brake is activated, stop the machine immediately! This could be due to a worn-down brake band, which requires repair from an authorized service center.
General| Type | Cordless Chainsaw |
|---|---|
| Power Source | Battery |
| Battery Voltage | 18V |
| Battery Compatibility | Makita 18V LXT Lithium-Ion |
| Motor | Brushless |
| Automatic Chain Oiler | Yes |
| Tool-less Chain Adjustment | Yes |
| Charger Compatibility | Makita 18V LXT Charger |
| Chain Speed | 1, 650 FPM |
| Chain Gauge | 0.043 inches |
| Chain Pitch | 3/8 inches |
| Bar Length | 12 inches |
| Weight (without battery) | 6.5 lbs |
Keep workspace clean, avoid hazards, and keep bystanders away.
Use proper plugs, avoid wet conditions, and protect cords.
Stay alert, use PPE, and prevent unintentional starting.
Critical safety rules for handling battery cartridges.
Advice to extend the lifespan of battery cartridges.
Step-by-step guide for battery insertion and removal.
Description of the system preventing motor overload.
Explanation of the thermal protection mechanism.
How the tool prevents battery over-discharge.
Operation of the power switch and lock-off button.
Steps for chain and guide bar installation/removal.
How to set the oil pump feed rate.
Information on the tool hanging feature.
Method for setting correct chain tension.
How to check and refill chain oil.
Techniques for safe and effective cutting.
Specific instructions for trimming branches.
Technique for cutting logs or branches.
Process of removing branches from a felled tree.
Advanced cutting techniques requiring special training.
Procedures for safely cutting down trees.
Guide on maintaining chain sharpness for optimal performance.
Instructions for using files for chain sharpening.
How to clean the guide bar groove.
Steps to ensure proper chain lubrication.
Procedure for sprocket replacement.
Steps for replacing worn carbon brushes.
Recommendations for proper tool storage.
