How to fix no oil on the chain of my Makita XCU03?
If there is no oil on the chain of your Makita Chainsaw, the oil tank might be empty, so fill the oil tank. Also, the oil guide groove could be dirty, so clean the groove.
Why does my Makita XCU03 Chainsaw motor stop running after a short time?
If the motor of your Makita Chainsaw stops running after a little use, it could be due to the battery's charge level being low. Recharge the battery cartridges, and if recharging doesn't help, replace the battery cartridge.
What to do if there is no oil on the Makita Chainsaw chain?
If there's no oil on the chain of your Makita Chainsaw, it could be due to several reasons. First, check if the oil tank is empty and fill it if needed. Another possibility is that the oil guide groove is dirty, so try cleaning it. Finally, there might be poor oil delivery, in which case you should adjust the amount of oil delivery with the adjusting screw.
Why is there no oil on the chain of my Makita XCU03 Chainsaw?
If there's no oil on the chain of your Makita Chainsaw, it could be due to several reasons. First, check if the oil tank is empty and fill it if needed. Second, the oil guide groove might be dirty, so clean the groove. Finally, there might be poor oil delivery; in this case, adjust the amount of oil delivery using the adjusting screw.
What to do if my Makita XCU03 Chainsaw chain does not run?
If the saw chain of your Makita Chainsaw does not run, the chain brake may be activated. Ensure that you release the chain brake.
What to do if my Makita XCU03 motor stops running after a little use?
If the motor of your Makita Chainsaw stops running after a short period, the battery's charge level may be low. Recharge the battery cartridges. If recharging isn't effective, consider replacing the battery cartridge.
Why my Makita XCU03 does not start?
Your Makita Chainsaw might not start because two battery cartridges are not installed. Make sure to install two charged battery cartridges. Another reason could be a battery problem, such as low voltage. In this case, recharge the battery cartridges, and if that doesn't work, replace them. Also, the main power switch may be off. If the chainsaw is left un-operated for a while, it automatically turns off, so turn the main power switch on again.
General| Type | Cordless Chainsaw |
|---|---|
| Power Source | Battery |
| Motor | Brushless |
| Bar Length | 12 inches |
| Battery Compatibility | 18V LXT Lithium-Ion |
| Chain Gauge | 0.043 inches |
| Chain Pitch | 3/8 inches |
| Automatic Chain Lubrication | Yes |
| Electric Brake | Yes |
| Variable Speed | Yes |
| Automatic Oiler | Yes |
| Tool-less Chain Tensioning | Yes |
| Voltage | 36V (18V X2) |
| Chain Speed | 3, 940 ft/min |
Details on overall length, weight, voltage, and chain/bar compatibility.
Lists compatible battery cartridges, chargers, and corded power sources.
Covers work area, electrical, power tool use, personal safety, and battery handling.
Explains protection systems, battery status, power switch use, and basic operation.
Steps for assembly, chain installation, and tensioning.
Covers lubrication, brake checks, cleaning, sharpening, and sprocket replacement.
Guidance on bucking, limbing, and felling wood safely.
Schedule for regular maintenance, storage, and solutions for common malfunctions.
To Next Page
