What to do if my Makita XCU04 Chainsaw does not reach maximum RPM?
If your Makita Chainsaw does not reach maximum RPM, check if the battery cartridge is installed properly as described in this manual. Also, the battery power might be dropping, so recharge the battery cartridges, or replace them if recharging isn't effective.
Why is my Makita XCU04 vibrating abnormally?
Abnormal vibration may be caused by a loose guide bar or saw chain.
Covers essential safety precautions applicable to all power tools.
Safety instructions specific to the use and care of battery-operated tools.
Specific safety precautions for operating a cordless chain saw.
Critical safety information regarding battery cartridge handling and charging.
Explains the integrated systems protecting the tool and battery from damage.
Procedures for properly adjusting the tension of the saw chain.
Procedures and safety considerations for felling trees.
To Next Page
General
