Makita XCU10 User Manual

2
ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: XCU05 XCU06 XCU10
Overall length (without guide bar) 256 mm
(10-1/8″)
Rated voltage D.C. 18 V
Net weight 2.8 - 3.3 kg
(6.2 - 7.2 lbs)
Standard guide bar length 200 mm
(8″)
250 mm
(10″)
300 mm
(12″)
Recommended guide
bar length
with 90PX 200 - 300 mm
(8″ - 12")
Applicable saw chain type
(refer to the table below)
90PX
Standard sprocket Number of teeth 6
Pitch 3/8″
Chain speed 0 - 24 m/s
(0 - 1,440 m/min)
(0 - 4,720 ft/min)
Chain oil tank volume 140 cm
3
(4.7  oz)
• Due to our continuing program of research and development, the specications herein are sub-
ject to change without notice.
• Specications may di󰀨er from country to country.
• The weight may di󰀨er depending on the attachment(s), including the battery cartridge. The light-
est and heaviest combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL1815N / BL1820B / BL1830 / BL1830B /
BL1840B / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD /
DC18SE / DC18SF / DC18SH
• Some of the battery cartridges and chargers listed above may not be available depending on your
region of residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other
battery cartridges and chargers may cause injury and/or re.

Makita XCU10 Specifications

General

Brand	Makita
Model	XCU10
Category	Chainsaw
Language	English