Need help?Do you have a question about the Makita XLT02 and is the answer not in the manual?
General| Brand | Makita |
|---|---|
| Model | XLT02 |
| Category | Impact Driver |
| Language | English |
Keep work area clean, avoid explosive atmospheres, and keep bystanders away.
Use correct plugs, avoid earthed surfaces to reduce electric shock risk.
Stay alert, use PPE, prevent unintentional starting.
Handle battery cartridges carefully to prevent fire, injury, or burns from shorting or damage.
Hold tool correctly, check sockets, maintain firm footing, and heed torque differences.
Avoid disassembly, shorting, water, and extreme temperatures for battery safety.
Align tongue and groove, slide until it clicks; ensure red indicator is hidden.
System cuts power on overload or low battery voltage to protect the tool and battery.
Operate tool via switch, electric brake, front lamp, and reversing switch for control.
Use correct size sockets; push onto anvil until it locks, pull to remove.
Install hook into groove and secure with screw for temporary hanging.
Loosen hex bolt, adjust angle head, match grooves, and tighten bolt.
Optional accessories for various applications, including straight and ratchet heads.
Graphs show torque vs. time for different bolts; test for proper fastening time.
Torque is affected by socket size, wear, bolt class, diameter, length, and accessories.
Perform maintenance only with authorized parts; avoid solvents.
Use only recommended accessories like sockets, extension bars, and adapters.
Covers defects in workmanship/materials for one year; exclusions apply.
Dust from construction may contain carcinogens; reduce exposure with ventilation and PPE.
To Next Page
