MAKOT SMT-01 - Page 2

Page 2 of 13
turned on or the power supply
decay occurs
length of control sensors
5 m
type of temperature sensor
thermistor NTC
type of temperature measurer
digital LED
load capacity of relay contacts
controlling the unit (heating system)
30 A 250 V AC
load capacity of relay contacts
controlling the stirrer (ventilator)
10 A 250 V AC
power supply
230 V AC 50 HZ
protection class
IP 55
safety class
CE
3. CONSTRUCTION.
Regulator SMT is placed in a compact casing, including all control and executive
elements:
The regulator is equipped with:
✓ button for switching the regulator on and off [1],
✓ button disabling automatic stirrer (fan) operation [2],
✓ button enabling manual operation of the stirrer (fan) [3],
✓ digital temperature meter allowing for current temperature control, independently
from switching on or off the regulator [6],