EasyManua.ls Logo

MAKS PRO User Manual

MAKS PRO
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
For more information on setting up and operating the device, please visit
www.maks.systems
The device needs Internet access to connect to the MAKS Cloud service. With
the help of the cloud service and the smartphone application, a user can
connect to MAKS PRO to manage and configure the device.
MAKS PRO is designed to ensure that only the minimum required amount of
personal data is stored in a cloud service under multi-level protection with all
the data exchange going through an encrypted channel.
Communication with the security company
User communication
User personal data
The MAKS PRO wireless security system center is designed to control the home
security system. MAKS PRO supports connection of up to 200 devices (sensors,
keyboards, key fobs, etc.) via radio channel at a distance of up to 2000 m.
The device interacts with the user and the security company, using the Internet
and GSM/GPRS communication for reliability.
Radio communication
Two transceivers - 868.0 ... 868.6 MHz, with several channels for redundancy.
Secure two-way radio communication with radio channel tamper detection.
Distance - up to 2000 m in the open space.
Three grades of power, maximum - up to 25 mW.
Round-the-clock Internet and GSM/GPRS communication, regardless of
whether the device was connected to a cloud service or not. Data exchange is
encrypted and protected against intelligent tampering.
WIRELESS SECURITY CENTER
• smartphone control
• smartphone or tablet setup
• two Ethernet and GSM/GPRS communication channels
• secure two-way radio communication
with wireless devices
• two transceivers 868.0 ... 868.6MHz. Range - up to 2000 m
• radio channel tampering detection
• 2500 mAh battery - up to 24 hours of operation
• connection to security companies via ContactID
• easy and fast installation
Power redundancy
The device is equipped with a 2500 mAh battery and can work for up to 24
hours in the absence of the main power supply.
Please note: when installing and operating the device, observe the general
rules and regulations for electrical safety for electrical devices.
Characteristics
Security groups
30
Wireless devices in the system
200
sensors
99
keyboards
16
keyfobs
60
Users
60
ISM wireless interface, up to 2000 m
868.0... 868.6 MHz
sabotage detection
+
secure two-way communication
key - 256 bits
Connection
network, Ethernet
100 Mbit
GSM/GPRS modem
for redundancy
Power supply and consumption
12 VDC, max. 0.35 A
power supply unit included
Power redundancy
battery, 2500 mAh
battery runtime
up to 24 hours
Operating temperature range
from -10°C to +55°C
Overall dimensions
167 x 120 x 25.4 mm
Weight
245 grams
Case color
white, black
Features
In the absence of the main power supply and during the operation from the
built-in battery, the device switches to the power saving mode. In this mode,
the Ethernet communicator is switched off and only GSM/GPRS is working.
The permanent display of the device status will be switched off and
the status will be displayed once every 30 seconds by flashing.
If the SIM card is missing for 5 minutes, the device will turn off the GSM/GPRS
modem. In this case, after inserting the SIM card, the device should be
restarted.
GSM/GPRS
850/900/1800/1900 MHz
Class 4 (2 W @ 850/900MHz)
Class 1 (1 W @ 1800/1900MHz)
Question and Answer IconNeed help?

Do you have a question about the MAKS PRO and is the answer not in the manual?

MAKS PRO Specifications

General IconGeneral
BrandMAKS
ModelPRO
CategorySecurity System
LanguageEnglish

Summary

MAKS PRO System Overview

Radio Communication

Details on MAKS PRO's two-way radio communication, including frequency, range, and tamper detection.

User Communication

Explains how users connect to the MAKS Cloud service for device management via a smartphone app.

Security Company Communication

Covers the system's round-the-clock Internet and GSM/GPRS communication for security companies.

Power Redundancy

Highlights the 2500 mAh battery providing up to 24 hours of operation during power outages.

System Features

Details on power saving mode, display indicators, and SIM card handling during power loss.

User Personal Data

Information on MAKS PRO's commitment to minimal personal data storage and encrypted data exchange.

Device Setup and Operation

Functional Parts

Identifies key physical components of the MAKS PRO device and their functions.

Device Indication

Explains the meaning of the MAKS light indicator states for communication and power status.

Switching On and Off

Instructions on how to power the device on and off, including using the button for battery power.

Resetting to Default

Procedure for resetting the MAKS PRO device to its factory default settings.

Installation Location

Guidance on selecting an optimal location for the MAKS PRO, considering communication and environmental factors.

Installation and Connection

Step-by-step instructions for physically installing the device and connecting essential cables and SIM card.

Setting Up the System

Steps for downloading the setup app, adding the device, registering wireless devices, and configuring users.