Need help?Do you have a question about the Maktec MT816 and is the answer not in the manual?
General| Model | MT816 |
|---|---|
| Category | Drill |
| No Load Speed | 0 - 3, 200 rpm |
| Impact Rate | 0 - 48, 000 ipm |
| Drilling Capacity (Concrete) | 13 mm |
| Weight | 1.8 kg |
| Chuck Capacity | 1.5 - 13 mm (1/16 - 1/2") |
| Drilling Capacity (Steel) | 13 mm (1/2") |
| Drilling Capacity (Wood) | 30 mm |
| Cable Length | 2.0 m (6.6 ft) |
To Next Page
