Need help?Do you have a question about the Maktec MT064 and is the answer not in the manual?
The tool is intended for drilling and screw driving in wood, metal and plastic.
Details on sound pressure levels, uncertainty, and acceleration values according to EN60745.
Explanation of symbols used in the manual, including EU specific ones.
Guidelines for maintaining a safe working environment to prevent accidents.
Precautions to prevent electric shock hazards during operation.
Guidelines for operator's well-being, alertness, and proper use of safety equipment.
Instructions for operating, maintaining, and storing the power tool safely.
Guidelines for safely using and maintaining battery cartridges and chargers.
Instructions for professional repair and maintenance of the power tool.
Crucial safety measures to prevent injury during tool operation, handling, and material contact.
Precautions for handling, charging, and storing battery cartridges to prevent hazards.
Step-by-step guide on how to properly insert and remove the battery pack.
Explanation of how to operate the tool's switch trigger for starting and speed control.
Instructions on using the reversing switch to change the direction of rotation.
Guide on how to insert and remove drill bits and driver bits securely.
Procedure for effective and safe screwdriving, including pilot hole recommendations.
Best practices for drilling holes in wood, including using guide screws.
Techniques for drilling metal, including punch indentation and lubricant use.
To Next Page
General
