Maktec MT816 Technical Information

P 1/ 10
PRODUCT
CONCEPT AND MAIN APPLICATIONS
Specification
Standard equipment
Optional accessories
Note: The standard equipment for the tool shown above may vary by country.
Model No.
Description
MT817, MT818
Hammer Drills 13mm (1/2")
Models MT817 and MT818 have been developed as the cosmetic
change of maktec hammer drills MT811 and MT812.
Their main features are:
• Industrial performance and durability at less expense
• Ergonomically designed handle with rubberized soft grip
The specification difference between these models are:
MT817/ 13mm (1/2") hammer drill with Keyed chuck
MT818/ 13mm (1/2") hammer drill with Keyless chuck
These models are also available with plastic carrying case
as “K” models; MT817K, MT818K
No
110
120
230
240
4.1 50/60
50/60
50/60
50/60
3.8
2.0
1.9
430
---
430
430
220
220
220
220
340
340
340
220 50/602.1 430 220 340
340
Continuous Rating (W)
Voltage (V) Cycle (Hz)
Input Output
Max. Output (W)Current (A)
Dimensions: mm ( " )
Width (W)
Height (H)
Length (L)
Model No.
(The image above is MT817.)
MT817 MT818
255 (10) 258 (10-1/8)
193 (7-5/8)
72 (2-13/16)
Chuck capacity: mm (")
Chuck type
Reverse switch
Impacts per min.: min.
ˉ¹= ipm
Capacities: mm (")
Steel
Concrete
Wood
Protection against electric shock
Power supply cord: m (ft)
Weight according to
EPTA-Procedure 01/2003*: kg (lbs)
0 - 2,800
Model No.
MT817
0 - 30,800
Keyed
1.5 - 13 (1/16 - 1/2)
13 (1/2)
13 (1/2)
18 (11/16)
Yes
Double insulation
1.8 (3.9)
2.0 (6.6)
MT818
Keyless
1.7 (3.7)
Variable speed control by trigger Yes
* with Side grip
Chuck key S-13 ................................................ 1 (MT817 only)
Key holder 10 ................................................... 1 (MT817 only)
Side grip ........................................................... 1
Depth gauge ..................................................... 1 (for some countries)
Cap ................................................................... 1 (for some countries)
Plastic carrying case ........................................ 1 ("K models" only)
No load speed: min.
ˉ¹=rpm
Specification
T
ECHNICAL INFORMATION
H
W
L

Maktec MT816 Specifications

General

Model	MT816
Category	Drill
No Load Speed	0 - 3, 200 rpm
Impact Rate	0 - 48, 000 ipm
Drilling Capacity (Concrete)	13 mm
Weight	1.8 kg
Chuck Capacity	1.5 - 13 mm (1/16 - 1/2")
Drilling Capacity (Steel)	13 mm (1/2")
Drilling Capacity (Wood)	30 mm
Cable Length	2.0 m (6.6 ft)