SM891
8
WARM
RINSE
EXTRA
RINSE
1
0
NO
SPIN
1
0
A- PROGRAM TABLE
B- DETERGENT DISPENSER
M- TEMPERATURE CONTROL KNOB
P- PROGRAMMER KNOB
D- PILOT LAMP
C- PUSH BUTTONS
SPIN SPEED ADJUSTMENT BUTTON
This function allows the spin speed to be altered by pressing the button
LOW SPEED
HIGH SPEED
WARM RINSE BUTTON
Press this button to have last rinse warm. This function only on regular and perma press cycles.
EXTRA RINSE BUTTON
The washing machine has been set up so that water consumption is reduced to a minimum;
three rinses are usually sufficient. If desired, it is possible to use an additional rinse cycle, by
selecting the button
NO SPIN BUTTON
To avoid any kind of spin select this button
Selecting the program and start-up
Select the program you require by turning the knob until the indicator coincides with the number of the program
to be selected The machine will start-up when the button or the knob are in the position "1" or "ON" .
Temperature control knob
The temperature Control Knob lets you select the best wash temperature for each load. The temperature options
are restricted on some of the programs (as show in the table on page 7).
A B C DPM
FUNCTION BUTTONS
To Next Page
Loading...
