33
Lamp lights up and
the operation stops
automatically when the
water tank is filled with
water (approx. 5.0L)
TANK FULL: If the water tank is full, the indicator light comes on and flash.
TIMER (time function) press timer to program time and “TIMER” light comes on while
timer is programmed. Before programming, make sure that the timer function has not
been activated (the light must be off).
CONTROLS
Press "TIMER" switch to
set the timer for auto-
matic stops.
Humidity setting
under mode
CONTINUOUS.
Press "Mode" switch
to select the modes of
operation.
Press "
" switch to start
the operation, to stop the
operation, press the switch
again.
To Next Page
Loading...
