Malsch Impulse Series

Questions and Answers

J
Julie HicksAug 4, 2025
How to fix Malsch Medical Equipment motors that won't operate with the hand controller?
- M
  Mr. Randy JohnsonAug 4, 2025
  If the motors on your Malsch Medical Equipment aren't operating via the hand controller, here are a few things to check: * Ensure the mains cable is properly plugged in and the socket is live. * Verify the cabling plug connection to both the motor and hand controller. * For ICS control, make sure the mains cut-off is activated by pressing the green button. * Confirm that the functions on the hand controller are not locked. * Check for any obstructions in the adjustment area and remove them. If these steps don't resolve the issue, the hand controller or motor might be faulty, and you should inform the operator, retailer, or Betten Malsch GmbH.
A
ajohnsonAug 11, 2025
What to do if opposite function activates on Malsch Impulse Medical Equipment?
- M
  Melissa DeleonAug 11, 2025
  If you find that the opposite function activates when you press the buttons on the hand controller of your Malsch Medical Equipment, it's likely that the motor plugs are mixed up. Check the correct cables or inform your operator, retailer or Betten Malsch GmbH.
B
brittanywalkerAug 16, 2025
Why do motors cut out on Malsch Impulse Medical Equipment?
- J
  jayknightAug 16, 2025
  If the motors on your Malsch Medical Equipment cut out after running for a while, it's possible the system has overheated. This can happen if the adjustment time or safe working load has been exceeded. To resolve this, allow the motor system to cool down properly.
T
Timothy LawrenceAug 22, 2025
What to do if side rails can no longer be set up properly on Malsch Impulse?
- P
  patrickgilesAug 23, 2025
  If the side rails on your Malsch Medical Equipment can no longer be set up properly, there might be an obstruction or bend in the mechanism. Check all moving parts and remove any obstructions, or contact our customer service team.
N
Nathan MyersAug 28, 2025
How to remove obstructions from Malsch Impulse castors?
- Q
  qmontgomeryAug 28, 2025
  If you find obstructions in the castors of your Malsch Medical Equipment, remove them.