Need help?Do you have a question about the Malyan MA10 and is the answer not in the manual?
Detailed instructions for installing the Cura slicing software on a Windows operating system.
General| Nozzle Diameter | 0.4 mm |
|---|---|
| Filament Diameter | 1.75 mm |
| Connectivity | USB, SD Card |
| Heated Bed | Yes |
| Bed Temperature | Up to 100°C |
| Nozzle Temperature | Up to 260°C |
| Technology | FDM (Fused Deposition Modeling) |
| Supported Materials | PLA, ABS |
| Power Supply | 220V |
To Next Page
